Switching Protocol VTP, STP, HSRP, VRRP, GLBP Configuration For CISCO L3 LAN Switch For Model Series 2960-L, C2960X, C2960XR, SF500, SG500

VLAN Trunking Protocol (VTP) is a Cisco proprietary protocol that propagates VLAN on the whole local area network. VTP carries VLAN information to all the switches in a VTP domain. Spanning Tree Protocol (STP) is a network protocol that builds a loop-free logical topology for Local Area Networks. The basic function of STP is to prevent bridge loops and the broadcast radiation that results from them. HSRP is a Cisco proprietary routing protocol that provides backup to a router in the event of failure. Using HSRP, several routers are connected to the same segment of an Ethernet, FDDI or token-ring network and work together to present the appearance of a single virtual router on the LAN. Virtual Router Redundancy Protocol (VRRP) provides for automatic assignment of available IP routers to participating hosts. This increases the availability and reliability of routing paths via automatic default gateway selections on an IP subnetwork. Gateway Load Balancing Protocol (GLBP) is a Cisco proprietary protocol which allows the load balancing of traffic among the master and standby routers.

Additional Information

We deliver Remote Configuration Sevices for all IT hardwares. Business and enterprises are avail these services in a short timeframe. We helps them with online services for switch configuration, CISCO layer 3 switch configuration, layer 3 switch security, layer 3 switching protocols, CISCO switch layer 3 configuration, switch configuration step by step, CISCO l3 switch configuration, CISCO 3550 layer 3 switch configuration etc. Our technical team work hard to deliver Remote services for CISCO vrrp, CISCO vrrp configuration, CISCO vrrp load balancing, CISCO vtp, CISCO vtp configuration, vrrp CISCO configuration, and vrrp configuration CISCO.